The Mercedes-Benz G65 AMG Has Everything…Except 4×4²-style Portal Axles
So why not add portal axles, some massive fender flares, roof spoiler, and beadlock wheels? Our customer did just that. This Mercedes-Benz G65 AMG was built for Mercedes-Benz of Lindon, now Mercedes-Benz of Draper, and was one of the first portal axle conversions in the U.S. In fact, to our knowledge, it was the first G65 AMG in the world fitted with 4×4 Squared-style portal axles. The portal axle kit provides the width and axle clearance, but to run 37″ tires with the carbon fiber fender flares, we had to install a 2″ lift kit, as well…plus a little more spacing in front to level out the vehicle.
A “little more” was actually 40mm. That caused a caster issue. So we had to develop new radius arms to increase caster, and therefore tracking and stability at speed. With the new arms installed, caster was back to 4+ degrees and the car handled nicely. After lifting the vehicle, the axles moved out to one side, so we fabricated adjustable panhard/track bars to re-center the axles. A KING 2.0 steering shock was added to help move the heavy beadlock wheels with 37″ tires — about 145 lbs per corner.
The look wouldn’t be complete without the 6×6 AMG/G550 4×4² Roof Spoiler and LEDs. This particular part is made of 100% genuine carbon fiber in the large 4×4² carbon fiber pattern to match the fender flares. The 18″ beadlock wheels and Nitto Ridge Grappler tires give the vehicle off-road capability that the stock 22-inch wheels with modest 55-series tires can’t match.
TIBUS 100MM PORTAL AXLE KIT for G-class W463
INCLUDES:
– 4 Portal Boxes with Pre-installed Gears
– 2 Front Outer Steering Knuckles
– 2 Heavy Duty Front CV Joints
– 2 Heavy Duty Rear Axle Shafts
– 2 Rear Brake Calipers with Integrated Parking Brake
– Set of Axle Braces for Front & Rear Axles
– 4 ABS Sensors
– Mounting Bolts
– Portals come with a manufacturer’s limited 1 year warranty against defects in material and craftsmanship
prior to installation.
– For vehicles with over 500 HP
1 21,826.00 21,826.00T
AERODYNAMICS
1 Carbon Fiber 6×6-style Front Roof Spoiler with LEDs for G-class 3,565.75 3,565.75T
1 Carbon Fiber Add-on Lip Spoiler (B-style) for G63/65 AMG W463 2,205.75 2,205.75T
1 LEDs for Carbon Fiber Front Add-on Lip Spoiler without Turn Signal 580.50 580.50T
1 Carbon Fiber Front Arch (B-style) for G-class Front Bumper 973.25 973.25T
1 Carbon Fiber Font Fender Air Vent for G-class W463 895.50 895.50T
1 Carbon Fiber Mirror Covers, Set for G-class W463 1,120.50 1,120.50T
1 Carbon Fiber Rear Air Intakes (on D-pillar) for G-class W463 1,030.50 1,030.50T
EXTERIOR
1 MANSORY Xenon Headlights with LED Design, 2 parts set – left & right, Black Inlay 1,895.00 1,895.00T
1 Mercedes-Benz OEM Carbon Fiber Fender Flares for Mercedes G 500 4×4² 7,980.00 7,980.00T
BRABUS Electric Entry Assist for Base MB G500 4×4 and G63 6×6, in combination with Serial or
BRABUS Sport Exhaust (Front Doors)
PROGRAMMING
1 MB of Lindon to Recalibrate with STAR tool for 37-inch Tires 0.00 0.00
SUSPSENSION
– 1 Eibach Spring Kit for Mercedes G-class with normal axle loads, Lift 40-50 mm 952.35 952.35T
– 2.5-inch KING Performance Racing Shocks, OEM Replacement for Mercedes G-class W463, External Oil
Reservoir and 20 Compression Settings to Adjust Ride, Front & Rear
– 1 3,957.88 3,957.88T
– 1 KING Steering Stabilizer Bar Shock for W463 575.00 575.00T
– 2 Polyurethane 40mm Spring Spacer (set of 2) 199.00 398.00T
WHEELS & TIRES
– 5 TIBUS Aluminum Beadlock Wheels in Matte Black 9Jx18″ et 20 1,175.00 5,875.00T
– 5 Nitto Ridge Grappler 37 x 12.5 R18 (stock 295/40-21 = 30.29″) 489.00 2,445.00T
– 5 Disassemble, Paint Wheels in Gloss Black, Reassemble 185.00 925.00
– 5 Custom Pinstriping, Gloss Red 110.00 550.00
– 5 Scrader 433MHZ Sensor for Mercedes 85.00 425.00T
– 1 Blace Oxide Plating for all Wheel Hardware 275.00 275.00T
– 20 Lug Bolts for 2017 MB G65 in Black (OE bolts are silver, plus wheels require shorter lug bolts) 4.00 80.00T
– 20 Black Bolts for Openings on Wheel Face, Black Oxide Plated 4.00 80.00T
– H&R Spacer Kit for G-class W463 +31mm, 5×130, Center Bore 84, 14×1.5 Thread Type, DRA Spacer
Type
– 1 179.00 179.00T
– 5 Mount & Balance Tires on Beadlock Wheels with TPM Sensors 55.00 275.00
– SHIPPING & TRANSPORTATION
– 1 Air Freight & Insurance: Germany to CA – 3 Suppliers, 3 Shipments 2,295.00 2,295.00
– 1 Customs, Taxes & Duties 1,595.00 1,595.00
– 1 Flatbed Service for Vehicle: Irvine to Temecula 350.00 350.00
– 1 Transporter: CA to UT
PAINT
– 2 Remove, Powdercoat Stainless Steel Bumper Covers, Reinstall 85.00 170.00
– 1 Remove, Powdercoat Stainless Steel Skid Plate, Reinstall 250.00 250.00
– 1 Remove, Paint Chrome on Grille and MB Star Gloss Black, Reinstall 225.00 225.00
– 2 Remove, Powdercoat Running Boards in Gloss Black, Reinstall 425.00 850.00
– 2 Powdercoat Exhaust Tips in Gloss Black 225.00 450.00
– 1 Powdercoat Spare Tire Cover in Gloss Black 250.00 250.00
– Replace all logos/emblems (V12 Bi-turbo x 2, ///AMG, G65, Hood Emblem) in Gloss Black, includes new
OEM Emblems
1 495.00 495.00
1 AMG Hand-painted in Gloss Red 75.00 75.00
2 Smoke OEM LED’s in Bezel below Headlight 55.00 110.00
2 Smoke LEDs in Carbon Fiber Front Lip Spoiler 55.00 110.00
2 Smoke Turn Signals on Top of Fender 115.00 230.00
2 Smoke Orange Reflectors on Front Fenders 55.00 110.00
2 Smoke Red Reflectors on Rear Quater Panels 55.00 110.00
2 Smoke Taillights 115.00 230.00
2 Smoke Lights in Rear Bumper 55.00 110.00
1 Engine Cover in Gloss Red [List $350] – No Charge 0.00 0.00
2 Paint Rear Calipers in Gloss Red 175.00 350.00
4 Paint Fender Flares in Body Color 245.00 980.00
4 Tape Off/Würth Undercoating for Fender Flares 45.00 180.00
INSTALLATION
40 Installation of Portal Axle Kit 110.00 4,400.00T
7 Installation & Wiring of Carbon Fiber Front Lip, LEDs, Add-on Bumper Spoiler & Roof Spoiler w/ LEDs 110.00 770.00T
6 Installation of Carbon Fiber Fender Flares and Fender Liners 110.00 660.00T
3 Installation of Front/Rear Springs & Shocks
