Description

2″ LIFT KIT FOR MERCEDES G-CLASS W463

OLD MAN EMU (OME) SUSPENSION SYSTEMS:
Engineering aftermarket 4WD suspension is extremely complex. Determining the right solution for your vehicle and your requirements demands special attention to many factors. Unlike numerous aftermarket suspension systems, which are only available in a single configuration targeting lift height, Old Man Emu offers a range of tuned and matched integrated suspension systems to ensure the right suspension is available to suit how the vehicle is outfitted and the conditions it will encounter.

 
DESIGN & DEVELOPMENT:
The Old Man Emu suspension engineers’ objective was to develop an integrated suspension system for the Mercedes G Wagon. The key areas that were considered were lift, load carrying and comfort. After test driving the original suspension set up it was noted the ride characteristics were very controlled giving a sporty feel, however when larger bumps were encountered bump stop engagement was frequent. In general, the ride was considered quite firm. A 50mm lift was targeted as this improves not only ground clearance but increased suspension travel. This allows more scope for shock tuning and resulted in a more compliant comfortable ride while maintaining excellent control.

 
FRONT SUSPENSION:
Springs: To maintain good vehicle control a significant spring rate increase over the OE was developed. 2 spring options were chosen to cater for vehicles with and without accessories or vehicles with different engine configurations.

Shock Absorbers: A development, tuning, and testing project was undertaken to correctly match the ride quality to the spring rate. A longer travel shock was developed and tuned which has resulted in a more comfortable ride while maintaining excellent control in all driving conditions.

 
REAR SUSPENSION:
Springs: A tapered wire progressive rate spring was developed to fulfill a supple and comfortable ride when the vehicle is empty but also have the ability to carry loads. This progressive rate spring will cater to vehicles that require optimized ride quality but also occasionally carries load.

Shock Absorbers: A longer travel shock was tuned to match the rear coil to provide comfort, control and increased travel.

For vehicles with front bar/winch. For vehicles with no front bar/winch, click here.

This 50mm G-class W463 Lift Kit includes:
– Front Springs
– Front Shocks
– Rear Springs
– Rear Shocks
– Approximately 50 mm lift F & R

Notes: First 2 pics are with a 305/55-20 (overall diameter = 33.21″). We also added a spacer kit to give more clearance on the inside at full lock, while moving the wheels out flush with the fender arches. No rubbing, no codes. Vehicle pictured does not have the OEM Electronic Damping Control system (e.g., Comfort).

 
Notes:
Most customers have installed the 50mm Spring Spacers and nothing else, without issue. However, after getting an alignment and seeing where the caster is at, or after driving the vehicle and finding it wanders a bit, some customers have decided to order the caster kit: https://www.gwagenparts.com/product/50mm-lift-kit-polyurethane-bushing-set-caster-correction/

Since the control arms can be removed (to install the bushings) without dropping the suspension, it is something you can do you later, if necessary.

Please contact us with any questions.  Thank you!

Notes: This part may be considered a Special Order if custom-made, low volume, or not something we generally stock. There may be a cost for Air Freight, Customs, Taxes, and Duties. Your card will not be charged during Checkout; only an Authorization will be obtained. If necessary, we will contact you with details before processing the order.  Please review our Terms & Conditions before ordering.