Description

Bilstein Shock Absorbers for Mercedes G-Wagen W463

– Weight: 7.00 LBS
– Price is per unit

Bilstein Shock Options:
Front Shock (1 Unit)
Rear Shock (1 Unit)
Full Shock Replacement (1 pair front, 1 pair back)

IMPORTANT NOTE
These shocks are sold individually. A quantity of 1 means you are ordering one shock, so to get a pair of front shocks, select a quantity of 2 of SKU BS-24-005043. For a pair of rear shocks, select a quantity of 2 of SKU BS-24-005142. They are sold individually in case one is damaged from rocks etc. However, we recommend replacing all shocks at the same time for best performance. To purchase all four individual shocks, simply select the third option of the three options above (Full Shock Replacement), and select a quantity of one.

Put together your own “Complete Suspension Kit – Medium” by first ordering your shocks on this page, then going to the OME spring page to order the OME Coil Springs by ARB. A complete kit would include the following:

One pair of ARB front coil springs 3028 (order a quantity of 1 of this part number)
One pair of ARB rear coil springs 3030 (order a quantity of 1 of this part number)
One pair of Bilstein front shocks BS-24-005043 (order a quantity of 2 of this part number)
One pair of Bilstein rear shocks BS-24-005142 (order a quantity of 2 of this part number)

Bilstein Front Shocks
Bilstein Mercedes G (W460) 280 GE B6 Offroad Shock Absorber
Bilstein number: 24-005043
Type: Bilstein B6
Scope of delivery: Shock Absorber
Side: Front
Type Shock Absorber: Mono-Tube Gasdruk
Engine power (KW):

Comments:
with standard chassis
with off-road suspension
without Airmatic DC

Bilstein Rear Shocks
Bilstein Mercedes G (W460) 280 GE Rear B6 Offroad Shock Absorber

Bilstein number: 24-005142
Type: Bilstein B6
Scope of delivery: Shock Absorber
Side: Rearzijde
Type Shock Absorber: Mono-Tube Gasdruk

Engine power (KW):

Comments:
with standard chassis
with off-road suspension
without Airmatic DC

Further Information from ARB about its Coil Springs

FRONT COIL SPRINGS
To maintain good vehicle control a significant spring rate increase over the OE was developed. 2 spring options were chosen to cater for vehicles with and without accessories or vehicles with different engine configurations.

REAR COIL SPRINGS
A tapered wire progressive rate spring was developed to fulfill a supple and comfortable ride when the vehicle is empty but also have the ability to carry loads. This progressive rate spring will cater to vehicles that require optimized ride quality but also occasionally carries load.

Notes: This part may be considered a Special Order if custom-made, low volume, or not something we generally stock. There may be a cost for Air Freight, Customs, Taxes, and Duties. Your card will not be charged during Checkout; only an Authorization will be obtained. If necessary, we will contact you with details before processing the order.  Please review our Terms & Conditions before ordering.